Sunday, April 29, 2012

Midnight Blue Tutorial with Extras! PTU TUT


Supplies Need:
Tube of choice: Dreams and butterflies tube by AnnaMarine. Find it HERE
Scrap kit: Midnight Blues by Rabid Designz. Find it HERE.
Eye Candy Gradient Glow HERE 
DSB Flux HERE 
My word art

[just click save as]


So, let's begin!
Open up frame 1 copy it and paste it as a new IMAGE, close the origional, make your canvas size pretty large here so we have enough room to work >image>canvas size>1600x1300. 
Add a black gradient glow with the following settings:

Duplicate image, add gradient glow [use the blue from thye frame] with the following settings:

Now add noise using DBX Flux mix at100%
 add shadow:
V: 0 H: 1
O: 86 B: 3
Open up Element 43 resize by 50% copy and paste it as a new layer beneath the first frame.
Open up frame 2 copy it and paste as a new layer on the very bottom...Now take your lasso and trace around the 1st frame shape [on this paper layer] once you have your circle of marching ants >edit clear.
Open up Element 18 copy and paste it as a new layer on the very top.
Open Element 20 copy and paste as a new layer resize 50%, positioning it on top of the first frame layer, add shadow same settings as before.
Open Element  24 , resize by 40% copy and paste it as a new layer beneath the candles>image>mirror>.
Open up Element 12 resize by 50% copy and paste it as a new layer beneath the candles.
Open Element  13 , rotate to the right 20% copy and paste it as a new layer beneath the candles but above the fan.
Open paper 4, copy and paste it behind the 1st circle frame. Now take your lasso and trace around the frame shape [on this paper layer], selections>invert>edit>clear.
Add your tube, I used the Dreams and butterflies tube by AnnaMarine at CDO.Copy and paste the close up image into a new layer on top of the paper we just cut... trim excess edges of this tube.
Now crop down as close to the edges as possible without cutting anything off but leave room to add your tube in...resize to 700 on the largest side.
[You can go smaller size on this if you prefer]
Open the Word Art, copy and paste as new layer on top of the tube placing it as I have it show here, I also applied a gradient glow to it with Eye Candy 4000...just like the settings before on the 1st frame.
Add your watermarks and copyright info.
I also used the same gradient glow on the name as I did with the word art, 
positioning it on the top left edge of the tag.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpen.
I hope you have enjoyed this tut.






Tuesday, April 24, 2012

All Alice Tutorial with Extras! PTU TUT


Supplies Need:
Tube of choice: Alice by Shayna Hall at The PSP Project, find it HERE.
Scrap kit: Alice By Wicked Princess Scraps, this is an exclusive scrap kit at The PSP Project, find it HERE.
Alice in Wonderland Font HERE 
FILTERS NEEDED:
Eye Candy Gradient Glow HERE 

So, let's begin!

Open up heart ribbon frame copy it and paste it as a new IMAGE, close the origional, make your canvas size pretty large here so we have enough room to work >image>canvas size>1600x1300. Now, rotate frame left 15%.
Open paper 8 copy and paste it as a new layer BEHIND the hert ribbon frame. Now take your lasso and trace around the shape frame on this paper layer, selections>invert>edit>clear.
Open AE frame copy and paste as a new layer rotate 20%, positioning it beneath the other frame layer, add shadow:
V: 0 H: 1
O: 86 B: 3
Open paper 10, resize by 66% copy and paste it behind the AE frame, rotate by 20%. 
Open topsy turvey cake, resize to 75% >image>mirror> copy and paste as new layer on very top layer. Place it to the bottom of the frame, add shadow.
Open the tree, resize to 14%, copy and paste as new layer beneath the topsy turvey cake, add shadow.
V: 3 H: 2
O: 86 B: 3
Add your tube, I used the Alice tube by Shayna Hall @ TPP. Resize to 75% copy and paste into a new layer, bring to top.
Open the sugar and tea pot, resize both to 45%, copy and paste as new layer above the tube, near her legs.
Open the mushrooms, resize both to 53%, copy and paste as new layer beneath the sugar and teapot. 
Open the Word Art, copy and paste as new layer on top of the tube placing it as I have it show here, I also applied a gradient glow to it with Eye Candy 4000.
Settings as follows:
------------------------------ 
Open the grass, copy and paste as new layer send it all the way to the bottom positioning it near the bottom as if she is standing on it..
Now crop down as close to the edges as possible without cutting anything off but leave room to add your tube in...resize to 700 on the largest side.
[You can go smaller size on this if you prefer]

Add your watermarks and copyright info.
I also used the same gradient glow on the name as I did with the word art, positioning it on the top left edge of the tag.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpen.
I hope you have enjoyed this tut.
Here's a few extras for you!







Friday, April 20, 2012

Lavender Memories Tutorial! PTU


Supplies Need:
Tube of choice: Suits Me by Barbara Jensen from Scraps N Crap,
Scrap kit: Lavender Memories By Kadoodled By Kaci  HERE
Chopin Script Font HERE 

So, let's begin!

Open up Frame6 copy it and paste it as a new IMAGE, close the origional, make your canvas size pretty large here so we have enough room to work. Now, rotate frame left 15%.
Open paper 8 copy and paste it as a new layer BEHIND the frame. Now take your lasso and trace around the frame, selections>invert>edit>clear.
Open frame 2 copy and paste as a new layer, positioning it on top of the other frame middle ways in. add shadow:
V: 0 H: 1
O: 86 B: 3
Open paper 1, copy and paste it behind the circle frame. Now take your lasso and trace around the frame, selections>invert>edit>clear.
Open leaves 2, resize to 36% >image>mirror> copy and paste as new layer on very top layer. Plce it to the bottom of the circle frame.
Open the clock, resize to 35%, rotate 10% to the left. Copy and paste as new layer on top of the leaves, add shadow.
V: 3 H: 2
O: 86 B: 3
Open the feather, >image>mirror> resize to 25%, copy and paste as new layer behind the clock.
Open the butterfly, resize to 10%, copy and paste as new layer on top of the clock near the top edge. 
Open flowers 2, resize to 15%, copy and paste as new layer on top of the clock near the bottom.
Now crop down as close to the edges as possible without cutting anything off but leave room to add your tube in...resize to 700 on the largest side.
Pick your tube, I used a tube from Scraps N Crap, Suits Me by Barbara Jensen. Add it behind the circle frame layer.
If you want to do what I did here, make her head come out of the top.
Get your lasso tool, encircle the part you want to make come out of the top, Selections>promote to layer>send that to the very top.
Add you watermarks and copyright info. Save it and add your names!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpen.
I hope you ahve enjoyed this tut.



Monday, April 16, 2012

Nightly Gothic Extras and Cluster Frame Freebie Set!

I made a gothy themed frame set and extras for you today.
As always click each image for full sized view.

All of this was made using The Nightly Gothic kit from Kirsty's Scraps,
you can get it HERE at The PSP Project.
The awesome poser tube is from Creative Intentions, You can get
"Sammie" HERE at The PSP Project.



FRAMES
****DOWNLOAD HERE or HERE****

I Support:

 photo Image4_zps330efc03.png

 photo Image6_zps73885132.png


 photo NAALogoJPG300AnnivBanner_zpsda861848.jpg

*click the stamp below to provide
therapy for children living with autism*

 photo Image5_zps86bf58a8.png

Pageviews

About Me

Deadly Desire Tagz
I'm happily married, I have 2 wonderful children and a few dogs. This is my little corner, enjoy your stay here and I hope you find a few treats here along the way.
View my complete profile

T.O.U.

The creations that I make whether they are a tag, forum set,

quick page or extras are made by me and my own creativity and imagination. Please do not rip apart, destroy, alter them or claim them as your own,THIS INCLUDES ADDING NAMES TO EXTRAS!! If you do any of these things you are committing an act of infringement and going against copyright laws. If caught you will be reported to the licensing companies and going against copyright laws and you will be reported to the licensing companies.

My Blinkies

Photobucket

My Other Blogs

 photo MTT_zpsd3f2ec6f.gif

I Create For


Photobucket

Photobucket

 photo AmyMarie_byangelsdesignz_zps795e170e.gif


Follow By Email

FOLLOWERS

Tut Writers Inc.

Photobucket