Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts
Tuesday, June 18, 2013
Summertime PTU Tutorial!
This tutorial was written by me on June 18, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: struggle by Zlata
-this is a quest tube that can only be gotten HERE
Scrap kit: Summer Cutie by Amy Marie's Kits. Find it HERE.
Eyecandy 4000>HERE
Freehand Font>HERE
My Word Art
*right click to save to your machine:
**************
So, let's begin!
*remember to save often!
Open up element 20, copy frame and paste it as a new IMAGE close the original. Make your canvas size pretty large here so we have enough room to work >image>canvas size>1600x1300.
add shadow:
V: 1 H: 0
O: 85 B: 3
Open paper 8, copy and paste as new layer. Take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open up element 70, copy and paste as a new layer on the bottom, under the frame and paper.
Open element 58, copy and paste as new layer, position it to the lower left side of the frame.
Open element 15, copy and paste as a new layer positioning it below the rock layer on the left side of the frame.
Open element 61, resize to 50%, copy and paste as a new layer placing it on the lower right area of the frame, add shadow.
Open element 52, resize to 22%, copy and paste as a new layer positioning it on the top layer on the lower left side of the frame in front of the rock, add shadow.
Open element 16, copy and paste as a new layer positioning on the top layer on the right side of the frame.
Add your tube, I used the struggle tube by Zlata at PFD. Place this tube beneath the element 20 [frame layer]. Take the lasso and trace around the part you want to come above the frame, selections>promote section to layer. Send this to the very top layer.
Crop down as close to the edges as possible without cutting anything off...resize to 500 on the smallest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
Open word art, resize if you need. I placed mine on the right side of the tag and added a shadow.
For the name I used the glass filter and
gradient glow filter from Eyecandy 4000 I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Monday, June 10, 2013
Sounds Of The Sea PTU Tutorial!
This tutorial was written by me on June 10, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: Fishtale by Eos Sparks.
Find it HERE at The PSP Project.
Scrap Kit of choice: Fishtale by Gimptastic Scraps
**************
So, let's begin!
*remember to save often!
Open up frame 2, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add shadow:
V: 3 H: 0
O: 100 B: 5
Open paper 7, take magic wand, click inside the frame shape selections>modify>expand to 22> make new raster layer and paste the paper into the selection on the new raster layer you just made.
Open sand, copy and paste as a new layer under the frame and paper layer, near the bottom. Duplicate layer, flip to the other side Image>Mirror. Merge layers together.
Duplicate layer.
Open water, copy and paste as a new layer, place it on top of the sand.
Open tree, copy and paste as a new layer on the top frame, make sure the end of the trunk touches the top of the sand. duplicate layer, rotate 20 degree to the right, send this tree to the bottom layer, pull it up and behind the frame layer as you see in my tag.
Open splash, copy and paste as a new layer just above the 1st tree.
Pull the splash down to cover the end of the tree trunk.
Open Toucan, resize by 30%, copy and paste as a new layer, place toucan on the top of the 1st tree, add shadow.
Open Parrot, copy and paste as a new layer on the top,
near the top edge of the frame, add shadow.
Open sun, copy and paste as a new layer under trees, place it between the trees.
Open pineapple, resize to 85%, copy and paste as a new layer on the top,
near the right edge of the frame, add shadow.
Open lime, resize to 30%, copy and paste as a new layer on the top,
near the right side to the pineapple, add shadow.
Open orange, resize to 40%, copy and paste as a new layer on the top,
inbetween the pineapple and lime, add shadow.
Open kiwi, resize to 30%, copy and paste as a new layer on the top,
inbetween the lime and orange, add shadow.
Open starfish, copy and paste as a new layer on top of the sand.
Open drum, resize to 60%, copy and paste as a new layer behind the starfish.
Add your tube, I used the tube fishtale by eos sparks. resize to 75%, copy and paste the as a new layer under the frame. Pull her out to where the tip of the tail is near the inner edge of the frame.
Grab the lasso, encircle her head and part of the chest and promote the section to a new layer that you want to keep in the tag, then send that layer above the frame layer but beneath the pineapple and drum. cut away any portion that is sticking out from the frame.
*use my tag as a sample*
Open bubbles, copy and paste as a new layer on the top.
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the sparkles is to add a new layer on the very bottom and flood fill it BLACK. This way you can see the edges of anything a light color.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
Open my word art. Copy and paste, position to the lower right side of the tag.
For the name I used the glass filter and then the gradient glow filter from Eyecandy 4000, I added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Sunday, June 2, 2013
Dark As Night PTU Tutorial!
This tutorial was written by me on June 2, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube: "Lydia" by JamieKidd.
I mine is from CILM but you can now get this tube at CDO now.
Scrap kit: True Blood by Gemini Creationz.
HERE at The PSP Project!
Eyecandy 4000>HERE
Pristina Font>HERE
My Wordart
*right click to save to your machine*
**************
So, let's begin!
*remember to save often!
Open up frame 1, rotate 10 degree to the left, copy frame and paste it as a new IMAGE close the original. Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add Shadow:
V: 2 H: 0
O: 100 B: 4
Open swirl, copy and paste as a new layer, place it on the top of the frame layer, on the lower left side, add shadow.
Open paper 9, copy paper, take magic wand, click inside the frame shape, click selections>modify>expand to 12> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open blood drips, resize by 80%, rotate to the left by 10 degree, copy and paste as a new layer, placing it below the frame layer but above the paper layer.
Open moon, copy and paste as a new layer, placing it below the frame layer in the upper right corner.
Open tree 3, copy and paste as a new layer, place it on the top of the moon layer, on the right side, add shadow.
Open fern, copy and paste as a new layer above the tree layer on the lower right side, add shadow.
Open grass 1, copy and paste as a new layer under frame and paper layer on the lower left side.
take the lasso tool and cut away any stray bottom pieces from the grass, see my tag for reference.
Open flower 1, resize to 50%, copy and paste as a new layer on top of the frame near the lower right edge.
Open flower 2, resize to 40%, copy and paste as a new layer above the last flower layer. Add shadow.
Open Button, resize to 40%, copy and paste as a new layer below flower2. Add shadow.
Open butterfly, rotate 10 degree to the right, resize to 40%, copy and paste as a new layer on top of the first flower. Add shadow.
Open tag2, copy and paste as a new layer on top of the frame, on the right side, Add shadow.
Open my word art, copy and paste the word art on the top layer,
placing it on the journal tag.
Crop down as close to the edges as possible without cutting anything off,
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add your tube, I used the tube "Lydia" by Jamie Kidd. Copy and paste the as a new layer placing her under the frame layer near the left side of the tag
*see my tag for reference. Grab the lasso, encircle her from the chest up, make that section a layer and send it to the op of the frame, cut off the remaining portions below the frame area.
Add Shadow.
Add watermarks and copyright info.
For the name I used the gradient glow filter from Eyecandy 4000, then I added a shadow,
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Friday, May 24, 2013
Pink Princess PTU Tutorial!
This tutorial was written by me on May 24, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube: Red Racer by Jessica Dougherty
HERE at CDO.
Scrap kit: Pink Princess by Amy Marie's Kits.
Find it HERE.
Eyecandy 4000>HERE
Precious Font>HERE
**************
So, let's begin!
*remember to save often!
Open up 105, pink bracket frame, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300. Rotate 10 degree to the right.
Add shadow:
V: 2 H: 2
O: 100 B: 5
Open pp1, paper, copy and paste as a new layer, take magic wand, click inside the frame shape selections>modify>expand to 14> make selection a layer Ctrl+Shift+P.
Open 104, circle chain frame, copy and paste as a new layer, add shadow.
Open 60, potted roses, copy and paste as a new layer..place it on top of the bracket frame, on the lower left side, add shadow.
Open 62, twig of roses, copy and paste as a new layer, on the upper left side of the bracket frame, add shadow.
Open 58, button, resize to 45%, copy and paste as a new layer just above the potted roses. Pull the button down to the edge of the pot, Add Shadow.
Open 127, clock cluster. copy and paste as a new layer on the top, near the lower right side, add shadow.
Open 9, black and pink pillows, resize to 46%, copy and paste as a new layer just behind the clock layer near the bottom edge, add shadow.
Open 101, bird, copy and paste as a new layer on the top left side of the bracket frame, add shadow.
Open 100, banner, rotate 15 degree to the left, copy and paste as a new layer on the top of the bracket frame near the upper left edge, add shadow.
Add your tube, I used the Red Racer tube by Jessica Dougherty. I'm only using the the full sized layer without the cat. C&P as a new layer on top of the clock cluster, make it look as if she is sitting on the clock's edge.
Add Shadow:
V: 3 H: 0
O: 100 B: 5
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the sparkles is to add a new layer on the very bottom and flood fill it BLACK. This way you can see the edges of anything a light color.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
Open 45, sparkles, copy and paste as a new layer, kind of place this over the potted rose layer.
For the word art I just used the Lokas Software cotton filter with a white gradient glow and a shadow. I did the same with the name.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Tuesday, May 14, 2013
Sailing PTU Tutorial!
This tutorial was written by me on May 14, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube: Katy" by Zlata M
Find it HERE at The PSP Project.
Scrap Kit: Solomons Island by Gemini Creationz,
find it HERE at The PSP Project.
Eyecandy 4000>HERE
Beachman Script Font>HERE
My Wortart>
*right click to save to your pc.
**************
So, let's begin!
*remember to save often!
Open up frame 4, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add shadow:
V: 3 H: 0
O: 100 B: 5
Open paper 8, copy paper, take lasso and "trace" around the frame shape, make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open floaty, resize by 50%, copy and paste as a new layer on the upper right corner of the window frame, add shadow. Take lasso and encircle part of the edge on the window frame, make selection a new layer and send that layer to the top.
Open frame 2, copy and paste as a new layer above the last frame and paper, pull the circle frame downward and to the right. *see my tags as a example.
Open paper 9, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 22> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open lighthouse, copy and paste as a new layer on the bottom, pull it silighty to the left side of the circle frame.
Open frame *white frame with red anchor, copy and paste as a new layer on the bottom, rotate 10 degree to the left, pull the frame to the far left side of the other frame, add shadow.
make sure you can see the anchor peeking out beside of the lighthouse.
Open paper 2O, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 22> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open flags, copy and paste as a new layer on the top of the window frame and white square frame making sure that each end point of the flag is even on the ends of each square frame, add shadow.
Open light, resize by 70%, copy and paste as a new layer on the top of the circle frame on the left side, add shadow.
Open knot, resize by 30%, copy and paste as a new layer just at the end of the chain on the light
Open compass, resize by 45%, copy and paste as a new layer, positioning to the lower rightt side on the top layer, add shadow.
Open cattail, copy and paste as a new layer under the compass layer, make sure the end pieces of the cattail is under the compass.
Open greenery, resize by 25%, copy and paste as a new layer under the compass and the left but above the cattail, add shadow.
Open rope 1, resize by 40%, copy and paste as a new layer, positioning it on the lower right side beneath the greenery, add shadow.
Open flower 5, resize by 30%, copy and paste as a new layer, positioning to the lower left side on the top layer beside the compass, add shadow.
Open flower 7, resize by 30%, copy and paste as a new layer, positioning to the lower left side on the top layer beside the last flower we added, add shadow.
Open flower 4, resize by 30%, copy and paste as a new layer, positioning to the lower left side on the top layer below the last flower we added, add shadow.
Open shell, resize by 40%, copy and paste as a new layer behind the flower layers, make sure the top peeks out above the flowers, add shadow.
Open waves, copy and paste as a new layer under the flower and compass layers.
Open star, resize to 40%, copy and paste as a new layer on the left side of the wave layer near the edge, add shadow.
Open star 2, resize to 20%, copy and paste as a new layer on top of the white star, make sure you cover the edge of the wave with this star, add shadow.
Add your tube, I used the tube "Katy" by Zlata M. I'm only using the close up layer.
Open tube, copy tube from the wrist up ONLY!
Paste this as a new layer under the circle frame. Grab the lasso, encircle her head and promote thhe section to a new layer that you want to keep in the tag, then send that layer to the very top.
go back to the layer we just put under the circle frame and cut away any portion sticking out of the frame on the bottom. Add shadow to this layer.
*use my tag as a sample*
Add Shadow:
V: 3 H: 0
O: 100 B: 5
Crop down as close to the edges as possible without cutting anything off,
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
Open my word art, copy and paste, position to the lower left side of the tag, add shadow.
For the name I used the glass filter, duplicated the layer, add a white gradient glow [eyecandy], added some noise to that 2nd glow layer with dsb flux blight noise, settings: light at 40%, add shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Monday, May 13, 2013
Puttin' On The Ritz PTU Tut!
This tutorial was written by me on May 13 , 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: Putting On The Ritz by Gio.
Find it HERE only @ The PSP Project.
Scrap kit: Shine Bright by Amy Marie's Kits.
Find it HERE!
Eyecandy 4000>HERE
My WordArt *right click and save to your pc
**************
So, let's begin!
*remember to save often!
Open up 35, black frame, copy and paste it as a new IMAGE close the origional, rotate 7 degrees to the left. Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add Shadow:
V: 2 H: 0
O: 100 B: 2
Open paper 10, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 14> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open 112, clock, copy and paste as a new layer, place this behind the black frame on the lower left side.
Open 119, bow, resize by 85%, copy and paste as a new layer, place this about midway on the black frame. Add shadow, same as before.
Open 100, fan, copy and paste as a new layer, positioning it in front of the black frame near the bottom left side.
Open 108, white ribbon,copy and paste as a new layer, position it in front of the black frame near the bottom.
Add shadow:
V: 3 H: 2
O: 75 B: 6
Open 117, doodle, copy and paste as a new layer, positioning it to the right side of the tag on the bottom edge.
Open 121, black stems, copy and paste as a new layer, positioning it to the right side of the tag on the bottom edge, on top of the doodle.
Open 114, black flowers, resize by 60%, copy and paste as a new layer, place these on the bottom left side of the frame.
Open 12, white flower, resize by 50%, copy and paste as a new layer, positioning it on top of the black flowers, add shadow.
Open 113, grey flower, resize by 45%, copy and paste as a new layer, positioning it on top of the white flower, add shadow.
Open 75, sparkles, copy and paste as a new layer, positioning it in front of the flower.
Add your tube, I used the Putting On The Ritz tube by Gio. Copy and past tube as a new layer, flip the image around >image>mirror>, place it on the top layer
near the right side of the frame, add shadow.
Crop down as close to the edges as possible without cutting anything off,
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Paste tube layer again, this time place it on top of the paper layer. Grab the lasso tool, Select all, click on the paper layer with the lasso tool, now go to the larger tube layer we just applied
and promote that section to a new layer, delete the layer of the full tube, we just want the area we promoted. Now, go to the blend mode and set this tube layer to luminance (Legacy) at 60%.
Add watermarks and copyright info.
Open my wordart, I've used a corona glow with basic settings to make my word art a little more visible on the tag and then sharpened it up, >adjust>sharpness>sharpen more.
For the name I used the glass,
gradient glow filter, HSB Noise from Eyecandy 4000, I also added a shadow and a corona glow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Thursday, May 9, 2013
Stars and Stripes PTU Tutorial!
This tutorial was written by me on May 9, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Scrap kit Stars N' Stripes Forever by Gemini Creationz.
Find it HERE at The PSP Project.
Tube: Abigail by Gemini Creationz Imaging.
Find it HERE at The PSP Project.
Eyecandy 4000>HERE
2 Peas Fourth Of July Font>HERE
**************
So, let's begin!
*remember to save often!
Open up frame 1, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Open frame 2, copy and paste as a new layer on top of the first frame, rotate to the right 10 degree.
Add shadow:
V: 2 H: 0
O: 100 B: 4
Open paper 13, copy paper, take magic wand, click inside the 2nd frame shape, click selections>modify>expand to 12> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open starcirclescatter, copy and paste as a new layer, placing it on the top layer.
Open startag, copy and paste as a new layer, place it on the top layer, on the upper right side.
Open journaltag, copy and paste as a new layer, place it on the top layer, on the lower left side.
Open flag pole sticker, rotate 20 degree to the left, copy and paste as a new layer under the journal tag, add shadow.
Open banner, resize to 60%, copy and paste as a new layer under the flag on the top of the frame area, add shadow.
Open glitterstars without shadow, resize to 60%, flip the image around >image>mirror>. Copy and paste as a new layer under the frame near the middle of the frame area.
Open curve 3, resize to 60%, copy and paste as a new layer under the frame near the middle of the frame area on top of the stars.
Open curve 2, resize to 60%, copy and paste as a new layer under the frame near the middle of the frame area on top of the blue curve.
Open curve 1, resize to 60%, copy and paste as a new layer under the frame near the middle of the frame area on top of the white curve.
Open flower 1, resize to 20%, copy and paste as a new layer [top layer] middle ways on top of the journal tag, see my tag as sample. Add shadow.
Open flower 2, resize to 20%, copy and paste as a new layer on top of the blue flower. Add shadow.
Open flower 4, resize to 20%, copy and paste as a new layer on top of the red flower. Add shadow.
Open flair 2, resize to 20%, copy and paste as a new layer on top of the white flower. Add shadow.
Open starswired, resize to 60%, copy and paste as a new layer near the bottom of the flag pole. Add shadow.
Add your tube, I used the tube "Abigail" by Gemini Creationz Imaging. Grab the lasso, encircle her from the elbow up,
copy and paste the as a new layer placing her under the frame layer near the left side of the tag *see my tag for reference.
Open the tube again , resize by 59% copy and paste the as a new layer placing her under the frame layer.
Grab the lasso, encircle her from the ankles up and promote the section to a new layer, then send that layer to the very top.
*use my tag as a sample*
Add Shadow on separate layer
----------
V: 3 H: 0
O: 100 B: 5
take the lasso tool again and cut off the bottom part of the shadow layer near her ankles.
Open proud american word art, grab lasso tool and circle the word "pride from the word art, resize by 71%, copy and paste the word art on the top layer,
placing it on the journal tag that is protruding out.
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the sparkles or curves is to add a new layer on the very bottom and flood fill it BLACK.
This way you can see the edges of anything a light color and cut off any portion that is sticking out beneath the frame.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
For the name I used the glass filter
settings here:
Add the bright noise filter to this, I used DSB Flux settings here:
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Thursday, May 2, 2013
Beauty Remains PTU Tutorial!
This tutorial was written by me on May 2, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Scrap kit & tube file: Alexandrite Tagger Kit by Gemini Creationz.
Find it HERE at The PSP Project.
Eyecandy 4000>HERE
Precious Font>HERE
My Wordart
*just right click and save to your pc*
**************
So, let's begin!
*remember to save often!
to work >image>canvas size>1600x1300. Rotate 10 degree to the right.
Add shadow:
V: 3 H: 0
O: 100 B: 5
Duplicate frame, flip image to other side>Image>Mirror. Pull the duplicated frame down and to the left slightly.
Open paper 2, copy and paste as a new layer, take magic wand, click inside the frame shape selections>modify>expand to 11> make selection a layer Ctrl+Shift+P.
Do this for both frames.
Open frame 1, copy and paste as a new layer in between the top frame and paper, pull the circle from down and to the right.
Open paper 11, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 22> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open greenery 3, copy and paste as a new layer..place it on top of the circle frame, flip image to other side>Image>Mirror.
Open feather, copy and paste as a new layer on the top of the greenery.
Open flower 3, resize to 65%, rotate to the right 10 degree, copy and paste as a new layer just above the feather. Pull the flower down to where only the
flowers show, take the lasso and cut away any stem part that is protruding from the bottom. Add Shadow.
Open pearls, copy and paste as a new layer on the top, near the bottom of the square frame, add shadow.
Open ribbon 1, copy and paste as a new layer on the top, near the bottom edge of the square frame, add shadow.
Open jewels, copy and paste as a new layer under the ribbon, add shadow.
Open alexan, copy and paste as a new layer, positioning to the lower left side. Sharpening the layer >adjust>sharpness>sharpen more,
Add Shadow:
V: 3 H: 0
O: 100 B: 2
Open ribbon 2, resize to 85%, copy and paste as a new layer on the top, near the bottom edge of the square frame, add shadow. Make sure it's overlapping the previous ribbon layer.
Add your tube, I used the tube that came with the kit by Gemini Creationz Imaging. I'm only using the top portion, Copy and paste the as a new layer placing her under the ribbon layers.
Grab the lasso, encircle her head and promote the section to a new layer that you want to keep in the tag, then send that layer to the very top.
*use my tag as a sample*
Add Shadow:
V: 3 H: 0
O: 100 B: 5
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the sparkles is to add a new layer on the very bottom and flood fill it BLACK. This way you can see the edges of anything a light color.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
Open my word art, you may have to resize this, I resized mine to 85%. Copy and paste, position to the lower left side of the tag.
*you may have noticed I have added the word art with and without a glow, I do this to allow you to recolor and add whatever you like to my word art*
For the name I used the glass filter and then the gradient glow filter from Eyecandy 4000, I added a shadow, duplicated the layer, added a gold color to the gradient glow filter then added some noise to that 2nd glow layer
then again added a shadow. I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Thursday, April 25, 2013
Lily PTU Tutorial!
This tutorial was written by me on April 25, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: Lily by Gemini Creationz Imaging.
Find it HERE at The PSP Project.
Scrap kit: Alexandrite Tagger Kit by Gemini Creationz.
Find it HERE at The PSP Project.
Eyecandy 4000>HERE
French Script Font>HERE
**************
So, let's begin!
*remember to save often!
Open up frame 3, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300. Rotate 10 degree to the right.
Add shadow:
V: 3 H: 0
O: 100 B: 7
Open frame 1, copy and paste it as a new layer placing it on top of the square frame.
Open paper 8, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open sparkles, copy and paste as a new layer on the top.
Open up tag, copy and paste as a new layer, positioning to the lower left side of the circle frame.
Open up embel 07-flower, copy and paste as a new layer, positioning to the lower left side,
under the tag.
Open up greenery 03, copy and paste as a new layer, positioning behind the circle frame
and circle paper, near the top right side.
Open up embel 10, resize to 75%, copy and paste as a new layer, positioning on the bottom layer.
Add your tube, I used the tube Lily by Gemini Creationz Imaging. I'm using the green layer. Resize by 70%, Copy and paste the as a new layer placing her under the circle frame layer.
Grab the lasso, encircle her head and promote that section to a new layer,
then send that layer to the very top.
Go back to the original layer, grab the lasso tool again and trace the edge of the circle frame [on the tube layer] and cut away the bottom edge that's
protruding, add shadow.
V: 3 H: 0
O: 100 B: 3
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the sparkles is to add a new layer on the very bottom and flood fill it BLACK. This way you can see the edges of anything a light color.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
For the name I used the glass and gradient glow filter from Eyecandy 4000, I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Wednesday, April 17, 2013
Pretty Poppy PTU Tutorial!
This tutorial was written by me on April 17, 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: Poppy by Zlata.
Find it HERE at The PSP Project.
Scrap kit: Linda by Amy Marie.
Find it HERE.
Eyecandy 4000>HERE
Fountain Pen Font>HERE
Forte Font>HERE
Word Art
*right click and save to your pc.
**************
So, let's begin!
*remember to save often!
Open up window (36), copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add shadow:
V: 3 H: 2
O: 100 B: 5
Open paper 014, copy paper, take selection too [rectangle], click around the frame shape,
make new raster
layer and paste the paper into the selection on the new raster layer you just made, place this behind the window.
Open up fence (60), copy and paste it as a new layer, under the window and paper, pull slightly to the right of the window. Duplicate image, mirror the image >Image>Mirror, pull this fence to the left side of the window.
*see my sample tag for reference*
Open up tree (26), copy and paste as a new layer, positioning behind the fence and it to the right side of the window.
Open up grass (73), copy and paste as a new layer, positioning behind the frame, near the bottom.
Open up grass (78), copy and paste as a new layer, positioning it near the bottom of the window.
Open up flower stem (6), copy and paste as a new layer, positioning it to the right side of the window near the bottom edge, under the grass.
V: 0 H: 2
O: 100 B: 3
Open up green vines (40), resize to 40%, copy and paste as a lew layer, place it near the upper right side corner of the window.
Duplicate image, mirror the image >Image>Mirror, pull this vine to the left side of the window, upper left corner.
Open up vines (46), resize to 85%, copy and paste as a new layer, position it to the very top of the window.
Add shadow:
V: 3 H: 2
O: 38 B: 2
Open up dark orange bow (43), copy and paste as a new layer. Position to the upper left section of the window.
Add shadow:
V: 3 H: 2
O: 38 B: 0
Add your tube, I used the tube poppy by Zlata. Resize by 80%, Copy and paste the as a new layer placing her on the top layer, on the green grass.
Open sparkles (86), copy and paste as a new layer on the top.
Open word art, copy and paste as a new layer, add shadow.
Crop down as close to the edges as possible without cutting anything off,
**a great way to see where the edge of the grass is to add a new layer on the very bottom and flood fill it BLACK. This way you can see the edges of anything a light color.**
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
For the name I used the gradient glow filter from Eyecandy 4000, I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Tuesday, April 9, 2013
The Spring Faires PTU Tutorial!
This tutorial was written by me on April 9 , 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Scrap kit: Spring Butterfly by Amy Marie's Kits.
Find it HERE.
Tube of choice: Woodlandfae by Deborah Grieves.
Find it HERE @ The PSP Project.
Eyecandy 4000>HERE
Marmellata (Jam)_demo Font>HERE
My word art
*right click and save to your pc!
**************
So, let's begin!
*remember to save often!
Open up pink frame (66), rotate 10 degree to the left, copy frame and paste it as a new IMAGE close the original. Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Add shadow:
V: 3 H: 2
O: 100 B: 8
Open paper 020, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open up yellow orbs (115), copy and paste as a new layer, positioning it middle ways on the paper.
Open up dragonflies (101), copy and paste as a new layer, positioning it in the middle of the frame.
Open up green frame (104), copy frame and paste it as a new layer, under the pink frame, pull upward slightly and to the right corner of the square frame.
Open up green vines (110 & 111), copy and paste as a new layer, position them to the upper right and left side of the frame.
Open up pink hanging flowers (88), copy and paste as a new layer. Position to the upper left section of the frame.
Open up tree stump (84), copy and paste as a new layer, positioning it to the right side of the frame near the bottom edge.
Open up green grass (23), copy and paste as a new layer, positioning it to the right side of the frame near the bottom edge, under the stump.
Open up pink flowers (56), resize to 70%, copy and paste as a new layer. Position to the bottom of the tree stump.
Open up butterflies & flowers (99), copy and paste as a new layer. Position to the bottom of the tree stump, on top of the pink flowers.
Open up water (18), copy and paste as a new layer, positioning it to the lower left side of the stump, just as I have in my sample tag.
Add your tube, I used the Woodlandfae by Deborah Grieves. Copy and paste the as a new layer placing her on the tree stump,
add a shadow but make it on a new layer:
make the opacity of the shadow layer to 22%.
Open sparkles (58), copy and paste as a new layer on the top.
Open word art, copy and paste as a new layer, add shadow.
Crop down as close to the edges as possible without cutting anything off,
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
For the name I used the gradient glow filter from Eyecandy 4000, I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Monday, April 8, 2013
Too Loud PTU Tutorial!
This tutorial was written by me on April 8 , 2013 and
any resemblance to any other tutorial is purely coincidental.
Supplies Need:
Tube of choice: Roxy by Angela Newman.
Find it HERE only @ The PSP Project.
Scrap kit: Roxy by Wicked Princess Scraps.
Find it HERE @ The PSP Project.
Eyecandy 4000>HERE
ah the monster is comming Font>HERE
Adrenaline : Zero Font>HERE
Word Art
*just right click and save to your pc!
**************
So, let's begin!
*remember to save often!
Open up frame 4, rotate, 6 degree to the right, copy frame and paste it as a new IMAGE close the original Make your canvas size pretty large here so we have enough room
to work >image>canvas size>1600x1300.
Open paper 1, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open up flame, copy and paste as a new layer, positioning it to the left side of the tag near the top edge.
Add shadow:
V: 3 H: 2
O: 100 B: 8
Open up frame 3, copy frame and paste it as a new layer, pull upward slightly and to the right corner of the square frame.
add corona filter around frame, settings below:
-----------------------------CORONA-----------------
Open paper 10, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open up music not scatter, copy and paste as a new layer. Position to the lower right section of the tag. Add Shadow.
Open up frame 3, copy frame and paste it as a new layer, pull frame to the lower left corner of the square frame.
add corona filter around frame, same settings as before.
Open paper 6, copy paper, take magic wand, click inside the frame shape selections>modify>expand to 11> make new raster
layer and paste the paper into the selection on the new raster layer you just made.
Open up cityscape 1, copy and paste as a new layer, positioning it to the left side of the heart frame, just as I have in my sample tag.
-duplicate cityscape layer, flip image>image>mirror place the duplicate image to the other side of the heart frame, see my sample tag for correct placement.
Open up framed star, rotate to the left 10 degree, copy and paste as a new layer, position it in to the lower left side of the heart frame.
Open up skull 1, rotate left 10 degree, copy and paste as a new layer, send it to the bottom layer, position it to the left corner of tag .
Add your tube, I used the Roxy by Angela Newman. Copy and paste the as a new layer near the right edge of the square frame,
add shadow.
Open word art, copy and paste as a new layer, add shadow.
Crop down as close to the edges as possible without cutting anything off,
resize to 650 on the largest side.
[You can go smaller size on this if you prefer]
Add watermarks and copyright info.
For the name I used the gradient glow filter from Eyecandy 4000, I also added a shadow.
Save and you are done!
If any part of your tag is blurry you can clear it up by sharpening the layer >adjust>sharpness>sharpen.
I hope you have enjoyed this tut.
Subscribe to:
Posts
(Atom)
I Support:
My Blinkies
My Other Blogs
I Create For
Tut Writers Inc.
